Environmental Chambers

The MTR26 Plant Growth Chamber MTR26 provides 26ft2 (2.4m2)of growth area and 24 (610mm) of growth height over two shelves. Plant Growth Chamber is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The Plant Growth Chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options for Plant Growth Chamber. The Plant Growth Chamber MTR26 provides 26ft2 (2.4 m2) of growth area and 24 (610mm) of growth height over two shelves and is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options.

Specification:

Key Product Attributes:

• 26 square feet (2.4 m2) growth area over two shelves for short to medium height plants
• Shipped fully assembled fits through standard doorways
• Closed-loop light control with dimming ballasts in Plant Growth Chamber
• Product certifications/markings; CE

Applications

The MTBBR Mushroom Grow Chamber is designed for growing. The growing levels within the chamber provide maximum growing space with the smallest foot print possible. Please contact Meditech with your specific needs and our experienced and trained staff will ensure you receive the right product and options for your application.

 

Construction

The exterior cabinet is free standing and insulated with CFC free polystyrene blue-green baked enamel on Galvanized steel or Stainless steel based on request. The interior is a Stainless Steel reflective skin offering uniform light reflectance. The floor pan is constructed of 22 gauge stainless steel, sloped towards a drain. The machine compartment contains all the controls, and internal refrigeration system. Easy access to the compressor and refrigeration components is by an external maintenance panel. This means servicing is accomplished without disturbing the mushroom . All handles and door hinges are heavy duty chrome finish. Door has keyed magnetic lock, protecting researchers valuable experiments.

 

 

Refrigeration and Humidification

The cabinet is supplied with a self-contained air cooled hermetically sealed condensing unit with hot gas bypass for continuous compressor operation, extended compressor life and close temperature control. Extended stem solenoids are used to promote quiet operation and a longer life. Humidity is produced with the help ultrasonic humidifier.

Applications:

• The MTBBR Mushroom Grow Chamber is designed for growing. The growing levels within the chamber provide maximum growing space with the smallest foot print possible. Please contact Meditech with your specific needs and our experienced and trained staff will ensure you receive the right product and options for your application.

Construction:

• The exterior cabinet is free standing and insulated with CFC free polystyrene blue-green baked enamel on Galvanized steel or Stainless steel based on request. The interior is a Stainless Steel reflective skin offering uniform light reflectance. The floor pan is constructed of 22 gauge stainless steel, sloped towards a drain. The machine compartment contains all the controls, and internal refrigeration system. Easy access to the compressor and refrigeration components is by an external maintenance panel. This means servicing is accomplished without disturbing the mushroom . All handles and door hinges are heavy duty chrome finish. Door has keyed magnetic lock, protecting researchers valuable experiments.

Refrigeration and Humidification:

• The cabinet is supplied with a self-contained air cooled hermetically sealed condensing unit with hot gas bypass for continuous compressor operation, extended compressor life and close temperature control. Extended stem solenoids are used to promote quiet operation and a longer life. Humidity is produced with the help ultrasonic humidifier.

MTPS360 Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft2 (6.6 m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Specification:


Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room : CE

MTP288 Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft2 (6.6 m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Specification:

Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room : CE

Applications:

The MTBBR Mushroom Grow Chamber is designed for growing. The growing levels within the chamber provide maximum growing space with the smallest foot print possible. Please contact Meditech with your specific needs and our experienced and trained staff will ensure you receive the right product and options for your application.

 

Construction:

The exterior cabinet is free standing and insulated with CFC free polystyrene blue-green baked enamel on Galvanized steel or Stainless steel based on request. The interior is a Stainless Steel reflective skin offering uniform light reflectance. The floor pan is constructed of 22 gauge stainless steel, sloped towards a drain. The machine compartment contains all the controls, and internal refrigeration system. Easy access to the compressor and refrigeration components is by an external maintenance panel. This means servicing is accomplished without disturbing the mushroom . All handles and door hinges are heavy duty chrome finish. Door has keyed magnetic lock, protecting researchers valuable experiments.

Refrigeration and Humidification

The cabinet is supplied with a self-contained air cooled hermetically sealed condensing unit with hot gas bypass for continuous compressor operation, extended compressor life and close temperature control. Extended stem solenoids are used to promote quiet operation and a longer life. Humidity is produced with the help ultrasonic humidifier.

The MTBBR Advantage:

The Chamber series of equipment has been developed to provide the researcher and producers with dedicated technology for the development of mushrooms. Multi tiers of growing space maximize the chambers footprint, making the MTBBR extremely space-efficient and ideally suitable where laboratory space is limited. Engineered and tapered air-handling plenums ensure consistent air-flow into the chamber. This, in combination with lamp configurations and canopies that are designed to maximize light dispersion, ensure a high degree of uniformity of all conditions within the growing area. This degree of uniformity has proven to be necessary for the efficient growth of modified forms of this species. Electronically dimmable ballasts, in combination with a closed-loop light control system, and quantum light sensor allow the researcher to program and control light intensity in micromoles. All controlled parameters are managed and logged through Meditechs reliable 7 Touch screen controller giving the researcher maximum flexibility and documented results. Sound manufacturing principals, quality components and our ISO9001 quality control program ensures that this equipment performs as specified.

 

Lighting:

The standard light intensity is 1000 micromoles/m2/s using T8 fluorescent lamps or LED Lamps adjustable from 10% to 100%. Dimming ballasts provide precise control over light intensity. Meditechs own Closed-Loop Light Control maintains precise intensity of programmed levels from 100 to 1000 micromoles/m2/s.

• Packaging Details: \

Meditech CO2 Incubators are designed to protect and advance your lifes research and work. The carefully engineered components are designed to maintain high relative humidity and precisely controlled temperature and CO2. This environment will not only keep cultures secure, but create conditions so your samples flourish. This incubator is designed with your convenience in mind by including many features to make operating the incubator a pleasurable experience.

 

Advanced technology and a secure

environment.

Meditech provides exceptional

conditions for the most reliable results in cell and tissue culture studies. Precision-engineered direct heat and IR sensor technology provides stable temperature and exact CO2 control.

 

Compact, sleek design.

Takes up minimal space and is stackable so you can optimize your laboratory space. Each incubator comes with its own stacking kit for

your setup convenience.

Rapid overnight decontamination cycle.

 

FEATURES AND BENEFITS

The Meditech compact and stackable, allowing you to attain the best use of the incubators interior and your laboratory space. The Model MT-O2 incubator is available to support hypoxic applications. Meditech Incubator comes with a drift resistant, highly-reliable Infrared (IR) Sensor, allowing for quick recovery after the door is opened. The interior is comprised of polished stainless steel with coved corners, which is highly resistant to corrosion and allows for an easy and effective cabinet wipe-down when needed. The adjustable shelves are readily configured to meet your applications need and slide out, making samples at the back of the chamber easy to access. Our tool-less interior design allows you to remove the interior components for routine cleaning or to setup multiple types of cell research. The rapid Decontamination Cycle cleans the incubator overnight with the push of a button, minimizing downtime. Multiple HEPA filter design continuously Protects the incubator from contamination. The Meditech-O has a tri-zone method for temperature control, utilizing individual heaters, which are located on the outside of every interior wall, to ensure highly uniform temperature that blankets the inside of the incubator. Temperature is rapidly recovered after each door opening. Meditech carefully designed airflow system maximizes airflow and results in rapid temperature and humidity recovery with optimal uniformity. Our ergonomic, intuitive user interface has a built in message center. It allows for effortless setup, at-a-glance monitoring from across the room and simple adjustments to set points and calibrations. Advanced data logging system records time stamped incubator parameters for on screen viewing. Built-in help feature allows easy access to frequently asked questions. 

Ergonomic, intuitive user interface.

Incubator setup is simple and the large alpha/numeric display allows for at-a-glance monitoring.

 

O2 Model. Suppressed oxygen control is crucial

In many applications, such as the research of acute and chronic diseases. These demanding hypoxic studies are made possible with our O2 incubator. The O2 incubators feature a strategically placed spacer, recovering humidity after door openings at a much faster rate and allowing cultures to cultivate at optimum environmental conditions.

• Item Code: MTCI
• Port of Dispatch: Nhava Sheva
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: wooden packing with fumigations

Meditech is the largest manufacturer and exporter of BOD Incubator in India
What are BOD Incubators

BOD incubators are used to maintain a temperature range of 20C below ambient to 45C . BOD incubators are widely used in Medicine, research laboratories and agriculture industries. These incubators are used in study of biochemical oxygen demand in studies related to bacterial culturing, Germination, Plants, Fermentation and insect studies.

The BOD incubators unit also comes with lights which are suitable for plant growth and insect studies.

Nitrogen in waste water samples and levels of organic matter can be studied with the help of Refrigerated BOD incubators. This water must be treated with chemicals and recycled back to the environment without posing threat to regular water supply system. Government regulatory agencies have enforced monitoring of air and water. Many organizations now started to test their samples which are kept in BOD incubators.

Stable Temperature Control
Temperature is controlled by two sensors located in the liquid-loaded monitor bottles.
Two thermistor sensors constantly monitor the temperature in both the upper and the lower part of chamber.
PLC and Microprocessor control ensures the most accurate temperature control available.
Designed to conform to AABB criteria, the series ensures stable and reliable temperature control utilizing Meditech original technology. A special highly efficient compressor designed and used by Meditech provides rapid cooling and quiet performance for each model.
Multi air-flow plenum system ensures excellent temperature uniformity in larger capacity models.
Temperature-maintained defrost designed with thermal sensors and heaters on the evaporator, all under precise microprocessor control.
Temperature Variations Prevented
The Meditech BBR Series is designed to minimize cold air loss even with frequent door openings.
Foamed-in-place insulation in the walls and magnetic sealed outer doors with double-pane glass window prevent chamber air leakage and promote complete door closings
Large air circulation fan enables rapid temperature recovery after door openings
User Friendly Design
Selectable storage system Fluorescent interior lamp with ON/OFF switch and a large view window in the outer door provide a clear view of stored items
Eye Level Digital display is easy to see, and is calibratable through the control panel Filterless construction eliminates
bothersome filter cleaning
Alarm and Safety Functions

To ensure the safety of precious blood supply, the Meditech Series provides the following safety functions
Audible and flashing LED visual alarms with remote alarm contacts, in case of power failure, high or low temperature
Door Alarm and key lock are standard features
Built-in temperature recorder on request
Temperature-maintained defrost designed with thermal sensors and heaters in the evaporator, all under precise microprocessor control.
ISO9001, ISO13485, 14000,CE, WHO-GMP certified BOD incubator with Advance LED Controller
Controller

LED INDICATION
Line In
Power
Comp On
Heater On
Battery On
Battery Low
Temp High
Temp Low
Power Fail
Sensor Fail
Chart Change
System On
Scrolling LIVE Data logger on LED screen
Temperature of BOD Incubator
Incoming Voltage
Ambient Temperature

 

Environmentally friendly Photostability Chamber. Meditech is the largest manufacturer of environment photostability chamber in India

Meditech technologies India Pvt Ltd manufactures the most innovative chamber series in humidity and temperature applications. These lines of chambers has both thermostatic (temperature only) versions and climatic (temperature humidity) versions.

Meditech has more than 25 years of knowledge , experience and expertise in the field along with feedbacks from both customers and distributors. Meditech is highly successful in producing rich features and highly reliable chambers to fulfill customers testing needs.

With Meditech series, one has the ability to apply the laws of nature (temperature and humidity) and allow unknown (possible product defects) to reveal themselves. There shall be increase in reliability and robustness with every test performed on Meditech test Chambers

rature test Chambers powered by Meditech Technology for safe testing of specimens

Fluorescent tube for day light effect and UV tubes for Ultra Violet ray in accordance to the ICH guidelines requirement of a lightning energy mounting to 1.2 mil lux per hours and integrated UV energy share of 200 Watt Hours per meter square.

As per ICH guidelines :

At 25°C : RH = 60%

At 30°C : RH = 65%

At 40°C : RH = 75%

Photostability Tests plays an important step in the development of new drugs and pharmaceutical substances. This is an indispensable element in the licensing process defined by federal regulating authorities. However, these tests are just as important for safeguarding the quality of the product within the framework of quality assurance

Together with the help of experts in the pharmacy industry and committees from the pharmaceutical industry and experts from the licensing authorities (such as the FDA) have developed the ICH Guidelines for the harmonization of stability tests. These guidelines define standardized storage and batch evaluation as well as the time sequence of the required analytic tests.

According to the ICH Guideline Q1AR2, stability tests have to be performed under defined climatic conditions in order to provide evidence of the stability of active substances.

MEDITECH offers a range of test chambers to meet these regulatory requirements as well as stability testing requirements for other industry segments of Pharmacy, Drugs, tablets, Cosmetic, Food, Beverages, etc.

We offer a centralized solution across all ICH conditions of real-time, intermediate, accelerated & semi-permeable study conditions along with a state-of-the-art 21 CFR Part 11 ready software that provide tools for viewing, trending, alarm management, audit trails, MKT and many other such features

 No-waste, custom-cut wall panels Average 60dBA maximum noise level Digital temperature controls with Touch Screen Narrow-range chart recorder, accurate to 0.5% of the 100 to 100C spare on demand Intelligent, active high/low alarms CFC Free insulated panels with SS304 inside and Galvannealed Mild steel with powder coated Outside (or) SS304 inside and outside for cGMP models Complete utilization of costly space
Unlike vendors which provide a limited number of standard-size rooms, Meditech insulated panels can be made to fit each installation exactly. This means your limited space will be fully utilized for productive activity. In some cases, particularly where structural columns must be surrounded by the room enclosure, Meditech custom-cut panels can increase floor space by more than 15% over rooms built with restrictive, standard size panels.
Construction Features Include
Pre-fabricated modular panel type construction with PUF insulation. Walk in type cooling cabinet to be assembled on site with floor panels having extra reinforcement to sustain the movement and sample load inside the chamber. Cooling cabinet is provided with effective air circulation system, refrigeration system, multi pane vacuum sealed observation glass window, chamber illumination and stainless steel racks and perforated trays.
Stand by refrigeration system and stand by humidity system is provided as an optional feature as a redundancy
 
Control Features
Microprocessor-based PID controller with auto tuning for accurate control of temperature and humidity conditions and printer interface facility to store data and to print it directly on a printer with variable print time interval.
A multiple point (8+8) temperature and humidity scanner with printer interface and PC interface facility for online mapping purpose.
A PLC system for an auto changeover of standby systems and other event logging and monitoring purpose.
GSM mobile alert module to give malfunction SMS on three cell phones simultaneously.
Door Access Security System with smart cards / bio-metrics and software to authorize and to monitor door accessibility.
Alternatively a Advance PLC system with touch screen display with all the above features incorporated. Network connectivity via Ethernet for web based online remote monitoring.
Utility management system provided for continuous machines operations and cross checks
Eliminate product stability problems
Temperature deviations at the working height can make compounds unstable and research results unpredictable. Meditech cold rooms meet and surpass uniformity requirements of 0.5C and maximum temperature gradients of 1.0C. The temperature is constant even when transient heat loads occur from process equipment and door openings.
Comfortable work environment
Productive research and manufacturing requires exceptional illumination and a quiet environment. Meditech walk in type cooling cabinet are equipped with recessed fluorescent lighting fixtures, which deliver a full 70 to 100 foot candle illumination at the working surface.  

Stability Chambers manufactures by Meditech as a result of intensive Research and Development along with years of experience involved in carrying out Stability Test and Shelf Life Test on drug and drug substances.
The Stability chambers are designed according to the ICH guidelines Q1 A (R2) ICH guidelines, WHO, MCA and USFDA requirements. They are superior in Air Flow Distribution, Temperature and Humidity Recovery, Controlled Technology.

Cabinet Construction:

• Accuracy, Uniformity, Reliability and Economy. The chambers are manufactured as per the cGMP Regulations and designed for low electrical and water consumptions

Low Energy And Low Water:

• Meditech Chambers are designed for low energy consumption for continues research works. CFC Free insulation material and world class energy efficient materials are used for construction.
• Most preferred chambers for USFDA & UK-MHRA approvals. Low RH Chambers now available for conditions of 25°C / 40% RH, 40°C / 25% RH & 30°C / 35% RH

Technical Data:

• Standard Model(S): Inside S.S.304 & Outside Galvannealed Powder Coated mild steel.
• GMP Model(G): Inside S.S. 316 with mirror polish & outside with SS 304 matt buff.
• Temp. Range /Accuracy: 20°C to 60°C /± 0.2°C
• Temp Uniformity : ± 2°C
• Humidity Range/Accu.: 40% to 95 % RH /± 2% RH
• Humidity Uniformity : ± 3% RH

Construction Features

• manufactured on fully automatic CNC machines thereby giving consistency in performance and an aesthetic look.
• CFC Free PUF insulation on automatic machine for better accuracy of Temperature and Humidity .
• Chambers are provided with effective air circulation system, refrigeration system, humidity system, full view observation glass door, chamber illumination and stainless steel perforated trays.
• Stand by refrigeration system and stand by humidity system is provided on request

 

Safety Features:

• Stability Chamber is provided with safety cut offs and alarms at centrally located places.
• Dedicated Safety system to shut off the humidity system and chamber shut down in case of overshoot or undershoot of temperature or humidity with audio visual alarm.
• Thermostatic safety system is provided as an additional safety feature.
• Low water level cut off for humidity system.
• Door open alarm.

Software

• 21 CFR part 11 USFDA compliant software with validation documents. Secured audit Trail. Multi level security password with aging and history. Electronic signature. Web based (Ethernet) online remote monitoring GSM alarm system (mobile alert) Data of door access security system in software with remote options. All the events, utility, working status, all the alarms are logged in the software. Records in graphical and in tabular form. Reports of mean Kinetic Temperature Reading. Works on 230V AC single phase 50Hz (country specific). Complete with extensive DQ, IQ, OQ and PQ protocols as per the International guidelines along with calibration certificates.

Control Features:

• Microprocessor-based 4 inch Touch Screen PID controller with auto tuning for accurate control of temperature and humidity conditions and printer interface facility to store data and to print it directly on a printer.

Meditech technologies India Pvt Ltd manufactures the most innovative humidity chamber series in humidity and temperature applications. These lines of chambers has both thermostatic (temperature only) versions and climatic (temperature humidity) versions.

Meditech has more than 25 years of knowledge , experience and expertise in the field along with feedbacks from both customers and distributors. Meditech is highly successful in producing rich features and highly reliable chambers to fulfill customers testing needs.

With Meditech series, one has the ability to apply the laws of nature (temperature and humidity) and allow unknown (possible product defects) to reveal themselves. There shall be increase in reliability and robustness with every test performed on Meditech test Chambers

 

Humidity Chambers manufactures by Meditech as a result of intensive Research and Development along with years of experience involved in carrying out Stability Test and Shelf Life Test on drug and drug substances.

The humidity chambers are designed according to the ICH guidelines Q1 A (R2) ICH guidelines, WHO, MCA and USFDA requirements. They are superior in Air Flow Distribution, Temperature and Humidity Recovery, Controlled Technology.

 

Low Energy And Low Water

Meditech Chambers are designed for low energy consumption for continues research works. CFC Free insulation material and world class energy efficient materials are used for construction.

Most preferred chambers for USFDA & UK-MHRA approvals. Low RH Chambers now available for conditions of 25°C / 40% RH, 40°C / 25% RH & 30°C / 35% RH

 

Technical Data

Standard Model(S): Inside S.S.304 & Outside Galvannealed Powder Coated mild steel.

GMP Model(G): Inside S.S. 316 with mirror polish & outside with SS 304 matt buff.

Temp. Range /Accuracy: 20°C to 60°C /± 0.2°C

Temp Uniformity : ± 2°C

Humidity Range/Accu.: 40% to 95 % RH /± 2% RH

Humidity Uniformity : ± 3% RH

 

Safety Features

Humidity Chamber is provided with safety cut offs and alarms at centrally located places.

Dedicated Safety system to shut off the humidity system and chamber shut down in case of overshoot or undershoot of temperature or humidity with audio visual alarm.

Thermostatic safety system is provided as an additional safety feature.

Low water level cut off for humidity system.

Door open alarm.

All the alarms and events are logged in the software.

 Software 21 CFR part 11 USFDA compliant software with validation documents. Secured audit Trail. Multi level security password with aging and history. Electronic signature. Web based (Ethernet) online remote monitoring GSM alarm system (mobile alert) Data of door access security system in software with remote options. All the events, utility, working status, all the alarms are logged in the software. Records in graphical and in tabular form. Reports of mean Kinetic Temperature Reading. Works on 230V AC single phase 50Hz (country specific). Complete with extensive DQ, IQ, OQ and PQ protocols as per the International guidelines along with calibration certificates.

Ultrasonic Humidifier  On Demand

Environmentally friendly Cold Rooms powered by Meditech Technology

Standard features of cold rooms include:

Temperature gradient of 1.0C Max. No-waste, custom-cut wall panels Average 70dBA maximum noise level Digital temperature controls with Touch Screen

Narrow-range chart recorder, accurate to 0.5% of the 100 to 100C spare on demand
Intelligent, active high/low alarms CFC Free insulated panels with SS304 inside and Galvanneled Mild steel with powder coated Outside (or) SS304 inside and outside

Complete utilization of costly space
Unlike vendors which provide a limited number of standard-size rooms, Meditech insulated panels can be made to fit each installation exactly. This means your limited space will be fully utilized for productive activity. In some cases, particularly where structural columns must be surrounded by the room enclosure, Meditech custom-cut panels can increase floor space by more than 15% over rooms built with restrictive, standard size panels.

 

Software

21 CFR part 11 USFDA compliant software with validation documents. Secured audit Trail. Multi level security password with aging and history. Electronic signature. Web based (Ethernet) online remote monitoring GSM alarm system (mobile alert) Data of door access security system in software with remote options. All the events, utility, working status, all the alarms are logged in the software. Records in graphical and in tabular form. Reports of mean Kinetic Temperature Reading. works on 230V AC single phase 50Hz (country specific). Complete with extensive DQ, IQ, OQ and PQ protocols as per the International guidelines along with calibration certificates.

Surface finish
Standard surface finishes for cold rooms include baked white enamel powder coated Mild Steel, with SS extrusions to join panels. For exceptionally corrosive environments SS panels are available as best option. These options are usually avoided except in extreme cases.

Air Flow Pattern

Our center-mount, low velocity air handler provides an umbrella airflow pattern which envelopes the room with conditioned air, providing maximum uniformity (1.0C or better) without the need for lay-in ceiling tiles which are difficult to clean and represent a prime location for mold and spore growth over time. All cold rooms are equipped with precision 100 ohm, 3-wire platinum RTD (Band 5) temperature sensors and thin-film polymer capacity humidity sensors with hermetically sealed microprocessor transmitters, representing the latest in sensor technology

Principles of Operation.
Balanced against a small refrigeration load, resistive heaters are finitely pulsed with a PID controller to maintain precise temperature control even at near-ambient temperatures, while maximizing energy efficiency. Humidification works on a similar principle: While the evaporator coil provides a small, but constant, dehumidification effect, ultrasonic transducers pulse water vapor back into the room for finite control. Meditech cold rooms do not use steam boilers, which are subject to corrosion over time, represent a high energy load, and introduce and independent and uncontrolled heat source within the room.