Plant Growth Chamber

Tissue Culture Room MTCR

The Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2 (5.6m2). This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential in mitigating condensation within media dishes. The Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2. This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential to mitigating condensation within media dishes Tissue Culture Room.

Specification:


Key Product Attributes:

• Multi-tier design maximizes tissue culture area
• Pressurized sidewall plenums deliver uniform vertical airflow to mitigate or eliminate condensation
• Tissue Culture Room Product certifications/markings : CE

The MGR series of MGR48 Plant Growth Room, available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity level
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• Plant growth room Product certifications/markings; CE

MBDW40 Plant Growth Room The Plant Growth Room BDW series walk-in chamber is based on a modular platform available in increments of 40 ft2 (3.7 m2). Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique to this Plant Growth Room is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces exceptional light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system. The Plant Growth Room MBDW series walk-in chamber is based on a modular platform available in increments of 40ft2 (3.7m2). These Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces unparalleled light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

Product Attributes:

• High light availability with unparalleled light uniformity Plant Growth Room
• Discrete lamp loft mitigates heat transfer to chamber area
• Top down airflow for uniform plant canopy temperatures
• Extended height for growth of large plants to maturity in Plant Growth Room
• Modular design to accommodate larger sizes
• Plant Growth Room Product certifications markings CE

MTPS144 Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft² (6.6 m²). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room : CE

Product Applications:

• With its unique ability to adapt to four different research applications, the adaptis a1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including:

Other Detail:

• Plant growth
• Arabidopsis
• Tissue Culture

Incubation by varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. the a1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the a1000 to be used for entomology
research while the communications option facilitates connection to a facilitys local area network.

Lighting:

• The lighting systems for the a1000 incorporate high efficiency t5 fluorescent lamps. Lighting system configuration is determined by the application kit where each kit stipulates a particular light intensity and lamp canopy configuration. Lamp and ballast combinations have been designed to ensure
• a balanced light spectrum while light intensity levels are adjusted (aR & pG Kits only) through a stepped selection process.

Refrigeration:

• The standard air-cooled refrigeration system is optimized to ensure adequate capacity for delivery of uniform conditions regardless of the particular kit installed. Kits do not alter the configuration of the refrigeration system and as such, kits can be exchanged with minimal effort.

Experiment Protection:

• User programmable alarms for key parameters such as temperature and humidity monitor the actual conditions within the chamber and notify the user with both audible and visual alarms. additional factory pre set alarms monitor system integrity while an alarm history recorder tabulates alarm events for historical reference and service.

Key Product Attributes:

• Single chamber uniquely adaptable to four different applications
• Precisely designed airflow and lighting configurations for each application
• Castors for ease of mobility
• Product certifications/marking: CE

Airflow:

• Precisely designed and manufactured air plenums are used for each of the four application kits. the plant Growth kit utilizes a solid rear plenum which discharges air from the floor for a uniform upward airflow. The arabidopsis and Incubation kits both use a perforated rear plenum which discharges the air horizontally for maximum condition uniformity in view of the use of flats or similar research vessels. the tissue Culture configuration incorporates individual air-shelves that discharge air vertically to reduce or eliminate condensation within media dishes

The ME8 Plant Growth Chamber ME8 is a highly customizable plant growth chamber capable of achieving extreme conditions of temperature, lighting levels, and humidity. The Plant Growth Chamber is well suited for research applications requiring a high level of control in a relatively small footprint. In addition to customizable environmental control parameters, options are also available for growth height, gas levels, and a variety of refrigeration configurations. The Plant Growth Chamber ME8 offers a minimum growth height of 46 (1180mm) in an 8ft2 (0.74m2) growth area. Please consult Meditech for your specific requirements for Plant Growth Chamber.

Specification:

Key Product Attributes:

• Designed for Floor Model installation
• Small footprint, yet can accommodate full-size plants in Plant Growth Chamber
• Standard lighting provides a broad based light spectrum at medium intensity
• Shipped fully assembled fits through standard Doorways
• Product certifications/markings; (NRTL), CE

The MPGR15 Plant Growth Chamber offers 16 ft2 (1.5 m2) of growth area and 57 inches (1450 mm) of growth height making it suitable for a range of applications including the growth of many tall plant species to full maturity. Standard is a counter balanced light canopy system. Shipped fully assembled, the Plant Growth Chamber MPGR15 fits through standard doorways. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options Plant Growth Chamber. The Plant Growth Chamber MPGR15 offers 16 ft2 of growth area and 57 inches of growth height making it suitable for a range of applications including the growth of many tall plant species to full maturity. Standard is a counter balanced light canopy system. Shipped fully assembled, the Plant Growth Chamber MPGR15 fits through standard doorways. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options.

Key Product Attributes:

• 16 ft2 of growth area and 57 inches of growth height suitable for tall plant species to full maturity
• Counter balanced lighting system with 6-foot lamps Plant Growth Chamber
• Shipped fully assembled  fits through standard doorways in Plant Growth Chamber
• Product certifications/markings; (NRTL), CE

• Item Code: MPGR15

The MBDW80 Plant Growth Room BDW series walk-in chamber is based on a modular platform available in increments of 40 ft2 (3.7 m2). Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique to this Plant Growth Room is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces exceptional light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system. The Plant Growth Room MBDW series walk-in chamber is based on a modular platform available in increments of 40ft2 (3.7m2). These Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces unparalleled light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

Specification:


Key Product Attributes:

• High light availability with unparalleled light uniformity Plant Growth Room
• Discrete lamp loft mitigates heat transfer to chamber area
• Top down airflow for uniform plant canopy temperatures
• Extended height for growth of large plants to maturity in Plant Growth Room
• Modular design to accommodate larger sizes
• Plant Growth Room Product certifications/markings : CE

The MBDW120 Plant Growth Room BDW series walk-in chamber is based on a modular platform available in increments of 40 ft2 (3.7 m2). Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique to this Plant Growth Room is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces exceptional light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system. The Plant Growth Room MBDW series walk-in chamber is based on a modular platform available in increments of 40ft2 (3.7m2). These Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces unparalleled light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

Specification:

Key Product Attributes:

• High light availability with unparalleled light uniformity Plant Growth Room
• Discrete lamp loft mitigates heat transfer to chamber area
• Top down airflow for uniform plant canopy temperatures
• Extended height for growth of large plants to maturity in Plant Growth Room
• Modular design to accommodate larger sizes
• Plant Growth Room Product certifications/markings : CE

The MTCR120 Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2 (5.6m2). This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential in mitigating condensation within media dishes.The Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2. This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential to mitigating condensation within media dishes Tissue Culture Room.

Key Product Attributes:

• Multi-tier design maximizes tissue culture area
• Pressurized sidewall plenums deliver uniform vertical airflow to mitigate or eliminate condensation
• Tissue Culture Room Product certifications/markings CE

The MTCR180 Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2 (5.6m2). This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential in mitigating condensation within media dishes. The Tissue Culture Room MTCR walk-in room provides a multi-tier modular platform available in increments of 60ft2. This makes the Tissue Culture Room MTCR chamber suitable for research involving plant tissue culture and is often used within large micro propagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential to mitigating condensation within media dishes Tissue Culture Room.

Key Product Attributes:

• Multi-tier design maximizes tissue culture area
• Pressurized sidewall plenums deliver uniform vertical airflow to mitigate or eliminate condensation
• Tissue Culture Room Product certifications markings CE

The MGR series of MGR96 Plant Growth Room, available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity levels
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• Plant growth room Product certifications/markings; CE

ApplicationsThe MTBBR Mushroom incubator is designed for growing. The growing levels within the chamber provide maximum growing space with the smallest foot print possible. Please contact Meditech with your specific needs and our experienced and trained staff will ensure you receive the right product and options for your application.ConstructionThe exterior cabinet is free standing and insulated with CFC free polystyrene blue-green baked enamel on Galvanized steel or Stainless steel based on request. The interior is a Stainless Steel reflective skin offering uniform light reflectance. The floor pan is constructed of 22 gauge stainless steel, sloped towards a drain. The machine compartment contains all the controls, and internal refrigeration system. Easy access to the compressor and refrigeration components is by an external maintenance panel. This means servicing is accomplished without disturbing the mushroom . All handles and door hinges are heavy duty chrome finish. Door has keyed magnetic lock, protecting researchers valuable experiments.Refrigeration and HumidificationThe cabinet is supplied with a self-contained air cooled hermetically sealed condensing unit with hot gas bypass for continuous compressor operation, extended compressor life and close temperature control. Extended stem solenoids are used to promote quiet operation and a longer life. Humidity is produced with the help ultrasonic humidifier.The MTBBR AdvantageThe Chamber series of equipment has been developed to provide the researcher and producers with dedicated technology for the development of mushrooms. Multi tiers of growing space maximize the chambers footprint, making the MTBBR extremely space-efficient and ideally suitable where laboratory space is limited. Engineered and tapered air-handling plenums ensure consistent air-flow into the chamber. This, in combination with lamp configurations and canopies that are designed to maximize light dispersion, ensure a high degree of uniformity of all conditions within the growing area. This degree of uniformity has proven to be necessary for the efficient growth of modified forms of this species. Electronically dimmable ballasts, in combination with a closed-loop light control system, and quantum light sensor allow the researcher to program and control light intensity in micromoles. All controlled parameters are managed and logged through Meditechs reliable 7 Touch screen controller giving the researcher maximum flexibility and documented results. Sound manufacturing principals, quality components and our ISO9001 quality control program ensures that this equipment performs as specified.LightingThe standard light intensity is 1000 micromoles/m2/s using T8 fluorescent lamps or LED Lamps adjustable from 10% to 100%. Dimming ballasts provide precise control over light intensity. Meditechs own Closed-Loop Light Control maintains precise intensity of programmed levels from 100 to 1000 micro moles/m2/s.

large germination chamberWhat is a germination chamber?
For those of you who don't know what a germination chamber is, it's a closed chamber that provides an optimum humidity and temperature control to help start seedlings. Providing the optimum growing environment can decrease germination times and improve germination rates

What is the advantage of germination chamber?
Providing the optimum environment can decrease germination time, improve uniformity and increase the number of seeds that germinate. Germination carts and growth rooms are used by growers to provide this environment and get the seedlings off to a good start.

Do germination chambers need light?
Light is generally not needed. A simple insulated chamber with heating mats can hold many trays of seeded soil just long enough to “pop” the seed. ... Starting – Initial growth of a plant once sprouted from a seed (after “popping” seeds). This follows germination.

What are the 5 steps of germination?
The process of seed germination includes the following five changes or steps: imbibition, respiration, effect of light on seed germination, mobilization of reserves during seed germination, and role of growth regulators and development of the embryo axis into a seedling.

How many seeds are in the germination chamber?
There are 12 shelves inside, each able to comfortably hold four 200-plug seedling trays, creating a total capacity of 48 trays or 9,600 seeds

Is humidity good for seeds?
You do not need a humidity dome for seeds – they will still germinate without it. However, a humidity dome will help you to get higher germination rates for your seeds. It will also reduce the time and effort you need to keep soil moist for seed germination.

• Item Code: mtlgc
• Production Capacity: 100
• Delivery Time: ready
• Packaging Details: wooden

Our modern In-House Manufacturing Facilities with Designing & Engineering, Manufacturing and Testing of Products ensure Highest Product Quality Standards. Our Manufacturing Techniques ensures efficient and time saving method of manufacturing to meet customer requirement on shorter lead time Our State-of-the-Art Manufacturing Facilities are based in India We has developed numerous ranges of Pyrolysis Plant for Diesel And Petrol from Plastic waste in India and Export : Use of proven technologies, high quality craftsmanship and low Total Cost of Ownership. 1TPD, 3TPD, 5TPD, 6TPD,10 TPD,12TPD,15TPD and 30TPD. All BHF Plants implement Powerful SCADA system for safety and Reliability

MTPS4332 Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft2 (6.6 m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room: CE

MTPS216 Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft2 (6.6 m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Specification:


Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room CE

MTPS72 Plant Growth Room provides a multi-tier chamber based on a modular platform and is available in increments of 72 ft2 (6.6 m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass-screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way. Meditechs Plant Growth Room MTPS provides a multi-tier chamber based on a modular platform and available in increments of 72ft2 (6.6m2). This Plant Growth Room configuration is often used for research involving C3 and similar low light, short plants. This makes the Plant Growth Room ideal for use in mass screening projects and for sizeable plant propagation programs. Pressurized and perforated side-wall plenums deliver air across each of three independently lit tiers integrated into fixed shelving banks on either side of a center aisle way.

Key Product Attributes:

• Modular design that easily accommodates variable sizes
• Multi-tier application to maximize Plant Growth Room
• Horizontal airflow to enable use of flats without impeding airflow in plant growth room
• Product certifications/markings plant growth room : CE

The MTAC26 Arabidopsis Chamber MTAC26 offers a small footprint and a low overall height which allows the unit to pass through doorways fully assembled. The interior of the cabinet features two shelves and light canopies with a plant height that is suitable for growing low and medium height plants. This makes the Arabidopsis Chamber MTAC26 an ideal cabinet for growing such species as Arabidopsis from seed to full maturity. Also, the Arabidopsis Chamber MTAC26 is shipped fully assembled thereby simplifying installation and set-up procedures. Please consult Meditech regarding specific requirements for Arabidopsis Chamber.

Specification:

Key Product Attributes:

• 26 square foot growth area over two shelves for low to medium height plants
• Shipped fully assembled – fits through standard doorways
• Precise closed-loop lighting control in micromoles/m2/s
• Product certifications/markings; CE

Lighting:

• Standard with the MTAC26 is a closed-loop lighting system (programmed in micromoles) which allows for precise and repeatable control of light output while also automatically adjusting for lumen maintenance. The standard lighting package provides a broad based light spectrum using both fluorescent and incandescent lamps. Standard light intensity is 300 micromoles/m2/s which is measured by a quantum light meter and transmitted to the controller for user readout. Lamp heat is controlled and managed by the refrigeration system.

MATC60 Arabidopsis Chamber provides an exceptional growth-area-to-footprint ratio. Arabidopsis Chamber uses a top-mounted refrigeration system that accommodates servicing from the front of the chamber, and that simplifies on-site installation. The Arabidopsis Chamber MATC60 offers three tiers with almost 60 ft2 (5.5 m2) of growth area in a 25 ft2 (2.32 m2) footprint. With a growth height of 20 inches (510 mm) above each shelf, the Arabidopsis Chamber MATC60 is ideally suited for Arabidopsis and other short to medium height plants. Standard on the Arabidopsis Chamber MATC60 is a flood tray at each tier to simplify plant irrigation. Please consult Meditech regarding specific requirements for Arabidopsis Chamber

Overview Applications:

• The Arabidopsis Chamber MTAC60 provides an unprecedented growth-area to foot print ratio. It uses a top-mounted refrigeration system that accommodates servicing from the front of the chamber, and that simplifies on-site installation.
• The Arabidopsis Chamber MTAC60 offers three tiers with almost 60 ft2 of growth area in a 25 ft2 footprint. With a growth height of 21 inches above each shelf, the Arabidopsis Chamber MTAC60 is ideally suited for Arabidopsis and other short to medium height plants. Standard on the Arabidopsis Chamber MTAC60 is a flood tray at each tier to simplify plant irrigation. Please consult Meditech regarding specific requirements.

Key Product Attributes:

• Unprecedented growth-area-to-footprint ratio of Arabidopsis Chamber
• Three shelves each with 21.5 inch growth height
• Lamp canopies separated from growth space by a transparent barrier to minimize heat transfer
• Top-mounted machine compartment minimizes footprint, accommodates serviceability, and simplifies installation
• Growth area drain pans double as irrigation trays for convenient mass watering of plants in Arabidopsis Chamber
• Product certifications /markings: CE

The MTBDR16 Plant Growth Chamber MBDR16 is designed for high-end plant physiology research where tight performance is critical to ensure a consistent plant canopy temperature throughout the chamber. To achieve tight performance Plant Growth Chamber, this unit employs a constant temperature lamp bank, cooled by the refrigeration system, which results in a constant light intensity output regardless of operating temperature. With 65 (1650 mm) of growth height and 16.2ft2 (1.5 m3) of growth area, the Plant Growth Chamber BDR16 accommodates tall plants to maturity. Please consult Meditech regarding specific requirements for Plant Growth Chamber. The Plant Growth Chamber MTBDR16 is designed for high-end plant physiology research where tight performance is critical to ensure a consistent plant canopy temperature throughout the chamber. To achieve a tight performance, Plant Growth Chamber this unit employs a constant temperature lamp bank, cooled by the refrigeration system, which results in a constant light intensity output regardless of operating temperature. With 65 (1650mm) of growth height and 16.2ft2 (1.5 m2) of growth area, the Plant Growth Chamber MTBDR16 accommodates tall plants to maturity. Please consult Meditech regarding specific requirements for Plant Growth Chamber.

Key Product Attributes:

• High performance chamber that delivers tight environmental control and uniformity
• Specular aluminum interior for improved light uniformity for Plant Growth Chamber
• 65 (1650mm) usable growth height allows the growth of tall plant species to maturity
• Plant Growth Chamber Product certifications/ markings ,CE

ME7-2 Plant Growth Chamber offers two independently controlled growth areas in a single unit making this model ideally suited for applications where smaller experiments need to be conducted in different environments, all in a small footprint. Despite its limited footprint, the Plant Growth Chamber ME7-2 offers over 23 (585mm) of growth height in each compartment and over 8.2ft2 (0.76m2) of total growth area. Please consult Meditech for your specific requirements for Plant Growth Chamber. Experiment ProtectionUser programmable set and forget alarms track the chambers operation according to the set point. This allows for exceptionally accurate monitoring, without the need for adjustment every time the set point changes in Plant Growth Chamber. Backup high/ low alarms are provided for extra protection. Visual and audible notification is provided when any alarm is triggered.

Key Product Attributes:

• Two independently controlled growth area
• Impressive growth height and growth area in a small footprint
• Standard lighting provides a broad based light spectrum at medium intensity
• Product certifications/markings: CE

The MTR26 Plant Growth Chamber provides 26ft2 (2.4m2)of growth area and 24 (610mm) of growth height over two shelves. Plant Growth Chamber is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The Plant Growth Chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options for Plant Growth Chamber. The Plant Growth Chamber MTR26 provides 26ft2 (2.4 m2) of growth area and 24 (610mm) of growth height over two shelves and is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options.

Key Product Attributes:

• 26 square feet (2.4 m2) growth area over two shelves for short to medium height plants
• Shipped fully assembled  fits through standard doorways
• Closed-loop light control with dimming ballasts in Plant Growth Chamber
• Product certifications/markings; CE

The MTR30 Plant Growth Chamber has features very similar to the MPGR15 . However, the Plant Growth Chamber MTR30 contains two shelves thereby doubling the growth area available in the MPGR15, yet with the same footprint. With 30 ft2 (2.79 m2) of growth area and 25 inches (635 mm) of growth height, the Plant Growth Chamber MTR30 is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. The Plant Growth Chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options for Plant Growth Chamber. The Plant Growth Chamber MTR30 has features very similar to the MPGR15. However, the Plant Growth Chamber MTR30 contains two shelves thereby doubling the growth area available in the MPGR15, yet with the same footprint. With 30ft2 (2.79m) of growth area and 25 inches (635mm) of growth height, the Plant Growth Chamber MTR30 is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. The Plant Growth Chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options.

Specification:

Key Product Attributes:

• 31ft2 growth area and 25 inches of growth height over two shelves for low to medium height plants
• Low overall height of 78 inches to accommodate low ceilings in Plant Growth Chamber
• Shipped fully assembled fits through standard doorways
• Product certifications/markings; CE

The MPGC20 Plant Growth Chamber MPGC20 offers an exceptional growth-area-to-footprint ratio. With the refrigeration and electrical systems entirely top mounted, the Plant Growth Chamber MPGC20 provides 20 ft2 (1.9 mm2) of growth area in a footprint of less than 25 ft2 (2.4 m2). Using a counter-balanced light canopy, the growth height extends to a maximum of 59 (1500 mm) making the Plant Growth Chamber MPGC20 an ideal candidate for research involving tall plant species to full maturity. Please consult Meditech regarding specific requirements. The Plant Growth Chamber MPGC20 offers an unprecedented growth area-to footprint ratio. With the entire refrigeration and electrical systems top-mounted, the provides 20 ft2 (1.8 mm2) of growth area in a footprint of less than 25ft2. Using a counter-balanced light canopy, the growth height extends to a maximum of 59 (1500mm) inches making the Plant Growth Chamber MPGC20 an ideal candidate for research involving tall plant species to full maturity. Please consult Meditech regarding specific requirements for Plant Growth Chamber.

Specification:

The MPGR14 Plant Growth Chamber MPGR14 provides a 14.4ft2 (1.34 m2) growth area and a 58.25 (1480mm) growth height making this chamber suitable for a range of applications including plant science, bioengineering, and soil and food sciences. Shipped fully assembled, the Plant Growth Chamber MPGR14 fits through standard doorways. The chamber comes standard with a closed-loop lighting system that uses 5-foot (1.5 m) lamps mounted into fixed canopies. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options for Plant Growth Chamber. The Plant Growth Chamber MPGR14 provides a 14 ft2 growth area and a 58 inch growth height making this chamber suitable for a range of applications including plant science, bioengineering, and soil and food sciences. Shipped fully assembled, the Plant Growth Chamber MPGR14 fits through standard doorways. The chamber comes standard with a closed loop lighting system that uses 5-foot lamps mounted into fixed canopies. Please consult Plant Growth Chamber Meditech with your particular application and area o research and we will provide you with an overview of the available options Plant Growth Chamber.

Key Product Attributes:

• Closed-loop lighting system with dimming control
• 58 inch growth height and 865 umoles/m2/s light intensity in Plant Growth Chamber
• Shipped fully assembled  fits through standard doorways
• Plant Growth Chamber Product certifications/markings; (NRTL), CE

The MGR series of MGR64 Plant Growth Room, available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity level
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• Plant growth room Product certifications markings CE

The MGR series of MGR128 Plant Growth Room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration.

This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity levels
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• plant growth room Product certifications/markings; CE

The MGR series of MGR192 Plant Growth Room, available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity levels
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• Plant growth room Product certifications/markings; CE

The MGR series of MGR144 Plant Growth Room, available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room. The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity level
• Efficient growth area-to-footprint ratio
• Economical platform for plant growth room
• Light right for enhanced flexibility of light intensity
• Plant growth room Product certifications markings CE

The MCG72 Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditechs system allowing plants to be distributed throughout the entire floor area. These Plant Growth Room are typically used for both short and tall plant applications requiring moderate to high level light intensities. Plant Growth Room Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern Plant Growth Room.The Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditechs Uni-floor system allowing plants to be distributed throughout the entire floor area. These chambers are typically used for both short and tall plant applications requiring moderate to high level light intensities. Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern for Plant Growth Room.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity level
• Efficient growth area-to-footprint ratio Plant Growth Room
• Light right for enhanced flexibility of light intensity
• Plant Growth Room Product certifications/markings; CE

The MCG108 Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditechs system allowing plants to be distributed throughout the entire floor area. These Plant Growth Room are typically used for both short and tall plant applications requiring moderate to high level light intensities. Plant Growth Room Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern Plant Growth Room.The Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditechs Uni-floor system allowing plants to be distributed throughout the entire floor area. These chambers are typically used for both short and tall plant applications requiring moderate to high level light intensities. Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern for Plant Growth Room.

Key Product Attributes:

• Multiple lamp canopies for varying plant maturity level
• Efficient growth area-to-footprint ratio Plant Growth Room
• Light right for enhanced flexibility of light intensity
• Plant Growth Room Product certifications markings CE

MTAC40 Arabidopsis Chamber employs a top-mounted refrigeration system. This design minimizes the product footprint, accommodates servicing from the front of the chamber, and simplifies on-site installation. Using two shelves, each with 32 inches (800 mm) of growth height, the Arabidopsis Chamber MTAC40 offers nearly 40 ft2 (3.7 m2) of growth area and accommodates medium to large size plants. This combination of features provides an excellent product for growing Arabidopsis from seed to full maturity, as well as other taller, medium-light plant species. Standard on the Arabidopsis Chamber MTAC40 is a flood tray at each tier to simplify plant irrigation. Please consult Meditech regarding specific requirements

Airflow:

• Airflow is distributed horizontally, via a perforated back wall plenum, across each shelf. This helps to establish uniform air distribution and a consistent temperature gradient around the growth area that is independent of plant loading. The unit includes fresh air intake and exhaust which are adjustable to allow up to 20 ft³/min (0.57m³/min.) of air exchange.

Key Product Attributes:

• Large growth area of Arabidopsis Chamber over two shelves (each with 31.5 inch growth height) with minimal product footprint
• Top-mounted machine compartment minimizes footprint, accommodates serviceability, and simplifies installation
• Growth area drain pans double as irrigation trays for convenient mass watering of plant

Our modern In-House Manufacturing Facilities with Designing & Engineering, Manufacturing and Testing of Products ensure Highest Product Quality Standards. Our Manufacturing Techniques ensures efficient and time saving method of manufacturing to meet customer requirement on shorter lead time Our State-of-the-Art Manufacturing Facilities are based in India We has developed numerous ranges of Pyrolysis Plant for Diesel And Petrol from Plastic waste in India and Export : Use of proven technologies, high quality craftsmanship and low Total Cost of Ownership. 1TPD, 3TPD, 5TPD, 6TPD,10 TPD,12TPD,15TPD and 30TPD. All BHF Plants implement Powerful SCADA system for safety and Reliability

Used for the purpose of recording various bio electrical movements like EEG, ECG, etc, this Digital Physiograph manufactured by us is known for providing highly accurate reading. The manufacture of this product involves use of high quality raw materials and advanced technology. We being one of the leading manufacturers of this product, believe quality to be our priority and thus we process all our products through a number of quality checks.Features: Single & Three (2+1) ChannelEasy to operate-even by a beginnerDesigned on the concept of couples forHigh sensitiveRuggedVersatileAccurateReliableLow CostTime & Event Channel (Optional)Student Physiograph Comprises of: Main ConsoleCouplersTransducersAccessories like electrodeThe main console houses: Chart DriveInk Pen recording systemMain AmplifierHousing for plug in couplersCouplers: Different couplers are designed to record different parameters. They are modular interchangeable in the same console or from console to console and one can easily plug them in or out in few seconds.The standard range of couplers is as follows:Biopotential Coupler: For recording all AC phenomena like ECG, EEG, EMG,ENG etc. It is supplied with 3 pin junction box, EEG-EMG electrodes and paste etc.EKG Coupler: For recording clinical ECG. It is supplied with 5 pin junction box, Limb & Chest electrodes and Jelly.Straingage Coupler: For recording from all straingage transducers and used to record muscle activity force, effect of drug on heart activity, Blood pressure from cannulated animals, volume changes etcPulse-Respiration Coupler: For recording pulse or respiratory activity using pulse, respiration Belt or respiration transducers.Temperature Coupler: For recording internal or surface temperature through transducers.Isotonic Coupler: Using it along with isotonic fine movement transducer one can perform experiment on isolated uterus and isolated intestineTransducers: A Transducer is a device which converts one form of physical energy to electrical energy or vice versa. To record parameters which are not available in electrical form e.g. Pulse, Respiration, Temperature, Phono Cardiogramme etc., one needs to use appropriate transducer. We manufacture following transducers.

The Plant Growth Chamber MPGC FLEX offers the ultimate in flexibility. In its standard configuration, the Plant Growth Chamber operates as a single-tier highlight growth chamber with a counterbalanced light canopy and upward airflow. A simple conversion alters the chambers configuration to either a double or triple tier configuration with medium light intensity and horizontal airflow. In a footprint slightly larger than 21.5 ft2 (2 m2), the Plant Growth Chamber FLEX provides either 19 ft2 (1.8 m2), 38 ft2 (3.6 m2), or 57 ft2 (5.2 m2) of growth area with corresponding growth heights of 59.75 (1520 mm), 25 (635 mm), and 14 (355 mm), respectively. The unique flexibility of the Plant Growth Chamber MPGC FLEX makes it ideal for use in facilities with multiple research programs. Please consult Meditech regarding specific requirements for Plant Growth Chamber .(See specifications for single-tier with upward airflow below). The Plant Growth Chamber MPGC FLEX offers the ultimate in flexibility. In its standard configuration, the Plant Growth Chamber operates as a single-tier highlight growth chamber with a counterbalanced light canopy and upward airflow. A simple conversion alters the chambers configuration to either a double or triple tier configuration with medium light intensity and horizontal airflow. In a footprint slightly larger than 21.5 ft2 (2 m2), the FLEX provides either 19 ft2 (1.8 m2), 38 ft2 (3.6 m2), or 57 ft2 (5.2 m2) of growth area with corresponding growth heights of 59.75 (1520 mm), 25 (635 mm), and 14 (355 mm), respectively Plant Growth Chamber.

Specification:

BHF Pyrolysis Plant Has life Span of About More Than 20 Years. The distribution of products between liquid, char, and gas on a weight basis for pyrolysis is approximately 75%, 12%, and 13% respectively, Under these conditions bio-oil yields of liquid, char, and gas

Recognition:

• The Department of Energys Office of Energy Efficiency and Renewable Energy  invests in a diverse portfolio of energy technologies to achieve a stronger economy, a cleaner environment, and a secure energy future
• The office works with industrial partners, national laboratories, and other stakeholders to develop the technologies and systems needed to cost-effectively turn our abundant, domestic biomass resources into clean, affordable bioenergy

Modern Facility:

• Our modern In-House Manufacturing Facilities with Designing & Engineering, Manufacturing and Testing of Products ensure Highest Product Quality Standards. Our Manufacturing Techniques ensures efficient and time saving method of manufacturing to meet customer requirement on shorter lead time
• Our State-of-the-Art Manufacturing Facilities are based in India
• We has developed numerous ranges of Pyrolysis Plant for Diesel And Petrol from Plastic waste in India and Export : Use of proven technologies, high quality craftsmanship and low Total Cost of Ownership. 1TPD, 3TPD, 5TPD, 6TPD,10 TPD,12TPD,15TPD and 30TPD. All BHF Plants implement Powerful SCADA system for safety and Relaibility