liquid silicone rubber

Manufacturers commonly use Liquid Silicone Rubber (LSR). Unlike compression molding, the mold is first closed and then material is introduced into the cavities through a system of sprues, runners and sub-runners. Once the parts are cured, the mold is opened, parts are removed and the process repeats.
The Liquid Silicone Rubber Process
1. The uncured silicone starts off in two barrels — one marked Compound A and the other Compound B. One barrel contains the cures, while the other holds an accelerant. These two substances are combined and kneaded by an external mixer in a one-to-one ratio, along with any color that is needed.
Benefits of LSR Molding
So why choose LSR for parts and seals?
Great resistance. Since LSR has high resistance to water, ozone and weather, LIM molding with this type of material gives excellent resistance properties.
Stability. LSR molds have stability with low compression set, the ability to resist extreme temperatures and can also be any color on the spectrum.

 

• Item Code: BHFLSR2F
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: wooden packing with fumigation

Manufacturers commonly use Liquid Silicone Rubber (LSR). Unlike compression molding, the mold is first closed and then material is introduced into the cavities through a system of sprues, runners and sub-runners. Once the parts are cured, the mold is opened, parts are removed and the process repeats.
The Liquid Silicone Rubber Process

1. The uncured silicone starts off in two barrels — one marked Compound A and the other Compound B. One barrel contains the cures, while the other holds an accelerant. These two substances are combined and kneaded by an external mixer in a one-to-one ratio, along with any color that is needed.

Benefits of LSR Molding

So why choose LSR for parts and seals?

Great resistance. Since LSR has high resistance to water, ozone and weather, LIM molding with this type of material gives excellent resistance properties.

Stability. LSR molds have stability with low compression set, the ability to resist extreme temperatures and can also be any color on the spectrum.

 

• Item Code: BHF210
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: wooden packing with fumigation

Liquid Silicon Rubber (With Curing Agent)

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.

When an Artificial Wood model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums

 

Best known for standing up to production casting of

 

ARTIFICIAL WOOD

This article details the steps that we took throughout the mold making and casting process:

 

Step 1: Select a Mold Making Method & Mold Rubber

Step 2: Construct Mold Box & Prepare Sculpture

Step 3: Measure, Mix & Pour Silicone Mold Rubber

Step 4: Demold

Step 5: Cut the Mold

Step 6: Casting

 

• Item Code: BHFAWM25
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/cans

Liquid Silicon Rubber (With Curing Agent)

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.

When an Artificial Wood model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums

 

Best known for standing up to production casting of

 

ARTIFICIAL WOOD

This article details the steps that we took throughout the mold making and casting process:

 

Step 1: Select a Mold Making Method & Mold Rubber

Step 2: Construct Mold Box & Prepare Sculpture

Step 3: Measure, Mix & Pour Silicone Mold Rubber

Step 4: Demold

Step 5: Cut the Mold

Step 6: Casting

 

• Item Code: BHFAWM20
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/Cans

ULTRA HIGH GLOSS & TRANSPARENT EPOXY RESIN - BUCR53
TECHNICAL SPECIFICATION
It is two-part epoxy system with High Glossy , Transparent, low viscosity and UV stable liquid epoxy resin for casting, coatings, and adhesive applications. It is a range of high-performance user-friendly epoxy resins.
FEATURES & BENEFITS:
100% Clear & Transparent.
High Gloss Finishing Green
Non Yellowing
Can be Pigmented using suitable pigments
Very less shrinkage
Industry leading UV stability
Excellent moisture protection barrier, stable in acidic pH solutions
Excellent flow properties (low viscosity) with efficient substrate wetting
Unique mechanical properties

STORAGE & PRE –MIXING:
The two components ( Resin & hardener ) should be stored in separate at all times prior to use. Store in cool , Dry & Away from Sun Light.
Warm Temperature should be avoided in storage area , Warm temperature reduce the shelf life. The handling equipment & the storage area should be free from chemical residue , Foreign matters.

TECHNICAL GUIDELINES FOR USING:
Measure the Part A ( Resin ) and the Part B ( Hardener ) in two separate containers.
Transfer Part A into the suitable Glass Beaker
Start gentle stirring
After stirring the part A, transfer Part B to it.
Continue the gentle stirring & Reaction to progress.
Take care not to get air trapped within mixture
The Mixed epoxy resin should be applied or poured within 5-10 min Time.
For design applications, Degassing may be required to remove the Air bubbles from the texture.
Upon curing remove the material from moulds.
SHELF LIFE:
Twelve (12) months from date of shipment when stored at 25ºC in the original sealed packages.
FIRST AID:
Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.
Skin Contact: In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.
Ingestion: Do not induce vomiting unless instructed by a physician. Contact physician immediately.
S.NO
DESCRIPTION
PARAMETERS
RESIN
HARDENER
1
Physical State
Low Viscous Liquid
Low Viscous Liquid
2
Colour
Clear
Clear
3
Viscosity (mPas 25 ºC)
1160
479
4
Mixing Ratio
100
60
5
Gel Time @ 25 ºC (Min)
 
5-10 min
6
Set Time (Min)
 
15-20 Min
7
 
Drying Time (Min)
 
 
30-40 Min

• Item Code: BHFERA
• Production Capacity: 100 Metric Tons
• Delivery Time: Ready Stocks
• Packaging Details: wooden packing with fumigation

Liquid Silicon Rubber (With Curing Agent)

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.

When an Artificial Wood model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums

 

Best known for standing up to production casting of

 

ARTIFICIAL WOOD

This article details the steps that we took throughout the mold making and casting process:

 

Step 1: Select a Mold Making Method & Mold Rubber

Step 2: Construct Mold Box & Prepare Sculpture

Step 3: Measure, Mix & Pour Silicone Mold Rubber

Step 4: Demold

Step 5: Cut the Mold

Step 6: Casting

 

• Item Code: BHFAWM
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/Cans

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.
When an STONE AND TILES model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums
Best known for standing up to production casting of
 
ARTIFICIAL STONE AND TILES
This article details the steps that we took throughout the mold making and casting process:
 
Step 1: Select a Mold Making Method & Mold Rubber
Step 2: Construct Mold Box & Prepare Sculpture
Step 3: Measure, Mix & Pour Silicone Mold Rubber
Step 4: Demold
Step 5: Cut the Mold
Step 6: Casting

 

• Item Code: BHFAST
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Bottles and cans

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.

When an STONE AND TILES model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums

 

Best known for standing up to production casting of

 

ARTIFICIAL STONE AND TILES

This article details the steps that we took throughout the mold making and casting process:

 

Step 1: Select a Mold Making Method & Mold Rubber

Step 2: Construct Mold Box & Prepare Sculpture

Step 3: Measure, Mix & Pour Silicone Mold Rubber

Step 4: Demold

Step 5: Cut the Mold

Step 6: Casting

 

• Item Code: BHFAST25
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/cans

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.
When an Plaster of Paris model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums
 
Best known for standing up to production casting of
 
JEWELLERY MOLD

This article details the steps that we took throughout the mold making and casting process:
 
Step 1: Select a Mold Making Method & Mold Rubber
Step 2: Construct Mold Box & Prepare Sculpture
Step 3: Measure, Mix & Pour Silicone Mold Rubber
Step 4: Demold
Step 5: Cut the Mold
Step 6: Casting

 

• Item Code: BHFHPJ
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/Cans

A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold.
When an STONE AND TILES model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums
 
Best known for standing up to production casting of
 
ARTIFICIAL STONE AND TILES

This article details the steps that we took throughout the mold making and casting process:
 
Step 1: Select a Mold Making Method & Mold Rubber
Step 2: Construct Mold Box & Prepare Sculpture
Step 3: Measure, Mix & Pour Silicone Mold Rubber
Step 4: Demold
Step 5: Cut the Mold
Step 6: Casting

 

• Item Code: BHFAST20
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Bottles/cans