epoxy resin

Ultra high gloss & transparent epoxy resin - bucr53
technical specification
it is two-part epoxy system with high glossy , transparent, low viscosity and uv stable liquid epoxy resin for casting, coatings, and adhesive applications. It is a range of high-performance user-friendly epoxy resins.
features & benefits:
100% clear & transparent.
high gloss finishing green
non yellowing
can be pigmented using suitable pigments
very less shrinkage
industry leading uv stability
excellent moisture protection barrier, stable in acidic ph solutions
excellent flow properties (low viscosity) with efficient substrate wetting
unique mechanical properties

storage & pre mixing:
the two components ( resin & hardener ) should be stored in separate at all times prior to use. Store in cool , dry & away from sun light.
warm temperature should be avoided in storage area , warm temperature reduce the shelf life. The handling equipment & the storage area should be free from chemical residue , foreign matters.

technical guidelines for using:
measure the part a ( resin ) and the part b ( hardener ) in two separate containers.
transfer part a into the suitable glass beaker
start gentle stirring
after stirring the part a, transfer part b to it.
continue the gentle stirring & reaction to progress.
take care not to get air trapped within mixture
the mixed epoxy resin should be applied or poured within 5-10 min time.
for design applications, degassing may be required to remove the air bubbles from the texture.
upon curing remove the material from moulds.
shelf life:
twelve (12) months from date of shipment when stored at 25c in the original sealed packages.
first aid:
eye contact: flush eyes with plenty of water. If irritation persists, seek medical attention.
skin contact: in case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.
ingestion: do not induce vomiting unless instructed by a physician. Contact physician immediately.

ultra high gloss & transparent epoxy resin - bucr53
technical specification
it is two-part epoxy system with high glossy , transparent, low viscosity and uv stable liquid epoxy resin for casting, coatings, and adhesive applications. It is a range of high-performance user-friendly epoxy resins.
features & benefits:
100% clear & transparent.
high gloss finishing green
non yellowing
can be pigmented using suitable pigments
very less shrinkage
industry leading uv stability
excellent moisture protection barrier, stable in acidic ph solutions
excellent flow properties (low viscosity) with efficient substrate wetting
unique mechanical properties

storage & pre mixing:
the two components ( resin & hardener ) should be stored in separate at all times prior to use. Store in cool , dry & away from sun light.
warm temperature should be avoided in storage area , warm temperature reduce the shelf life. The handling equipment & the storage area should be free from chemical residue , foreign matters.

technical guidelines for using:
measure the part a ( resin ) and the part b ( hardener ) in two separate containers.
transfer part a into the suitable glass beaker
start gentle stirring
after stirring the part a, transfer part b to it.
continue the gentle stirring & reaction to progress.
take care not to get air trapped within mixture
the mixed epoxy resin should be applied or poured within 5-10 min time.
for design applications, degassing may be required to remove the air bubbles from the texture.
upon curing remove the material from moulds.
shelf life:
twelve (12) months from date of shipment when stored at 25c in the original sealed packages.
first aid:
eye contact: flush eyes with plenty of water. If irritation persists, seek medical attention.
skin contact: in case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.
ingestion: do not induce vomiting unless instructed by a physician. Contact physician immediately.
s. No
description
parameters
resin
hardener
1
physical state
low viscous liquid
low viscous liquid
2
colour
clear
clear
3
viscosity (mpas 25 c)
1160
479
4
mixing ratio
100
60
5
gel time @ 25 c (min)
 
5-10 min
6
set time (min)
 
15-20 min
7
 
drying time (min)
 
 
30-40 min